FREM3D ASA-GF is an advanced composite material based on a glass fiber reinforced ASA polymer. This gives the material excellent mechanical strength and hardness, which makes printed parts resistant to loads and long-term exposure to UV radiation and moisture.
Characteristics
- 10% Fiberglass
- Excellent mechanical strength and hardness
- UV Resistant
- Matte print surface
- Good layer binding
Recommended print settings
- Nozzle temp = 240-270 °C
- Bed temp = 80-100 °C
- Hardened nozzle and enclosed chamber are recommended but not required.
| Characteristics | Value | Test method |
| Density | 1.11g/cm3 | ISO 1183 |
| Tensile Modulus | 2550 MPa | ISO 527(1) |
| Tensile Strength | 55 MPa | ISO 527(1) |
| VICAT Softening Point | 98 °C | ISO 306 |